Sunrise Cleaning Services

Post-Construction Cleaning Services in Abbotsford

Owner-led service | 5.0 Rated on Google | 10+ years of experience

Book My Cleaning Today

5.0 Google Rating

What does post-construction cleaning include in Abbotsford?

A new build or renovation is not ready for presentation while fine dust and surface residue remain. Sunrise Cleaning Services provides post-construction cleaning services in Abbotsford after the site is safe and trade work is complete.

Post-construction cleaning focuses on fine dust, surface residue, fixtures, cabinets, floors, interior glass, and final presentation after building or renovation work. The exact scope depends on the project stage, square footage, dust level, materials, access, and whether a rough, detail, or final clean is required.

Dust & Debris Removal

Remove light, non-hazardous loose debris
Vacuum fine dust using suitable equipment
Wipe ledges, trim, doors, frames, and surfaces
Repeat dust removal where fine particles resettle
Detail baseboards and floor edges

Fixtures & Finishes

Clean cabinet interiors and exteriors when empty
Clean counters, sinks, taps, and fixtures
Clean interior windows, sills, and tracks (quoted)
Remove labels or light adhesive residue
Clean newly built washrooms and kitchens

Rough clean

A rough clean may remove light packaging, dust, and loose non-hazardous material after major work. It does not replace the contractor's responsibility for heavy construction waste.

Detailed clean

A detailed clean addresses surfaces, cabinets, fixtures, windows, trim, kitchens, washrooms, and floors after trades are substantially finished.

Final touch-up

A final touch-up may occur before photographs, inspection, handover, or occupancy. It focuses on dust that settled after the detailed clean.

Site-readiness requirements

Cleaning should begin only when:

Major cutting, sanding, and drilling are complete
Wet paint, caulking, grout, and finishes have cured enough for safe cleaning
Trades have removed tools and heavy waste
Electrical, stairs, railings, and access routes are safe
Water and power are available when required
Hazardous materials are removed by qualified providers
The cleaner has permission to access the site

If active work continues during cleaning, new dust may settle and reduce the result.

Our post-construction cleaning process

Site assessment

Review the project type, square footage, stage, surfaces, flooring, windows, dust level, access, parking, waste, water, power, and deadline.

Written scope

Identify rough, detailed, or final cleaning. Separate high-access work, adhesive removal, paint spots, exterior windows, and heavy debris from standard tasks.

Safety confirmation

The contractor or owner confirms that the site is ready and free from uncontrolled hazards. Safety concerns can delay or stop the work.

Dust and detail cleaning

Use a top-to-bottom sequence and suitable vacuuming, wiping, and floor-cleaning methods. Fine dust may need repeated passes.

Final walkthrough

Review the agreed areas and identify permanent marks, trade defects, damage, or residue that requires a specialised method.

Experience behind the service

Harman's cleaning background includes deep cleaning, windows, walls, woodwork, furniture, floors, high-touch sanitation, room inspections, and safety procedures. His supervisory experience included planning work and checking common areas.

Post-construction cleaning benefits from that structured approach because dust can settle across many surfaces and a clear room-by-room process is needed.

How much does post-construction cleaning cost in Abbotsford?

Pricing depends on square footage, project stage, dust level, number of windows, cabinets, fixtures, flooring, ceiling height, adhesive or paint residue, access, parking, waste, deadline, and whether repeat visits are required.

A renovation of one room and a full new build should not receive the same quote. Photos, plans, or a site walkthrough help define the actual work.

Work not included unless specifically assessed

Hazardous or regulated materials
Asbestos, lead, or silica remediation
Biohazard cleanup
Heavy demolition waste
Sharp construction debris mixed with waste
Active mould remediation
High exterior windows or unsafe ladder work
Paint, cement, grout, or adhesive removal that may damage finishes
Trade defect repair
Floor refinishing or specialised restoration

Frequently Asked Questions

When should post-construction cleaning be scheduled?

Schedule it after major dust-producing work and trade cleanup are complete. Leave time for a final touch-up before inspection, photographs, handover, or occupancy.

Do you remove construction debris?

Only light, non-hazardous debris that is agreed in the quote. Contractors should remove heavy waste, sharp materials, chemicals, and regulated debris.

Can all construction dust be removed in one visit?

Fine dust can resettle after the first pass, especially if work continues or air systems circulate particles. Some projects need a detailed clean followed by a final touch-up.

Do you clean after a home renovation?

Yes. Post-renovation cleaning can be quoted for kitchens, bathrooms, basements, additions, or other completed areas when the site is safe.

Do you clean windows after construction?

Interior glass, sills, and tracks can be quoted. Paint, adhesive, cement, scratches, exterior height, and specialised glass restoration require separate assessment.